Nevermind, I figured out how to disable the PCIE lock. I used icelord's guide and even though I couldn't find "CB0200005984C075" in the HP Mini 210 bios I searched for "5984C075" and found "A30200005984C075." I took a chance and switched the 75 to EB and my Intel 5300 card works now. No 104 error message on boot.
Here's a copy and paste of
icelord's guide with my changes in red:
1. Download from HP site last (it was tested with F.04) native BIOS
2. Unrar obtained file with WinRAR
3. Unrar one again obtained
3660F04.EXE file with WinRAR
4. We receive a directory:
- Code: Select all
* 3660F04.fd
* Ding.wav
* InsydeFlash.exe
* iscflash.dll
* iscflash.sys
* noname
* platform.ini
5. Get EZH20 BIOS editor (attached)
6. Start exh2o.exe, open
3660F04.fd file from obtained directory
7. Strat WINHEX (or any other direct memory HEXeditor)
8. Open RAM -> Ezh2o -> Entrie Memory
9. Find HEX Values -> "2F9F2FE69548B54A" (landmark, was found in front of the line will be clearly visible «EEPROM» in ASCII)
10. From this place Find HEX Values -> "
A30200005984C075"
11. Replace 75 (JNZ short) to EB (JMP short)
12. SAVE
13. Switch back to EzH2O, File -> Save As, exit.
14. Run InsydeFlash -> Start -> OK
15. ALL DONE